POE-PAN8-GB

The unique POE-PAN8-GB panel can power 8 passive PoE devices through passive PoE injectors. It is a cost-effective solution for remote PoE powering of wireless devices, IP phones, IP cameras etc. With this panel, there is no need to buy new expensive PoE switches or multiple individual injectors. If the powered device does not have a POE extractor, it can be combined with a passive POE splitter. This version boasts support for up to 1Gbps bitrate over Gigabit Ethernet.

Key Features of the POE-PAN8-GB

Bulk, economical PoE power supply
SUpports up to 8 PoE devices
Supports Gigabit Ethernet and passive PoE
Power Supply not included (buy according to the required specification)

Gigabit PoE PoE-PAN8-GB PoE Injector with Easy Installation

The device is not complicated to set up. The main part of the installation consists of connecting the cables. Just connect the existing network to the Ethernet ports on the one side of the POE-PAN8-GB, and on the other, connect the cables to the devices that require PoE for simultaneous data and power transmission. The POE-PAN8-GB uses a standard 2.1mm jack or panel connector with a terminal block for power.

Parameters and Specifications:

Interface:
8 × RJ-45 shielded input (data)
8 × RJ-45 shielded output (data + power supply)

Input:
12 - 57V DC 2,1mm/Phoenix DC connector

Output:
12 - 57V (max. 1A per port)

Ethernet:
TIA/EIA 568 Cat. 5

Dimensions:
60 × 180 × 25mm

Weight:
160g

Specifications

PoE výstup

Passive Done!

Number of PoE ports

8 × Done!

Output voltage

57 V Done!

Output current

1,000 mA Done!

LAN port transmission speed

100 Mbit Done!

PoE type

PoE výstup

Passive Done!

PoE properties

Number of PoE ports

8 × Done!

Output voltage

57 V Done!

Output current

1,000 mA Done!

LAN port properties

LAN port transmission speed

100 Mbit Done!

Number of LAN ports

8 × Done!

Features

Power Supply

From the network Done!

Minimum operating temperature

0 °C Done!

Maximum operating temperature

40 °C Done!

Dimensions and weight

Width

60 mm Done!

Height

25 mm Done!

Depth

180 mm Done!

Weight

160 g Done!

Colour

Purple Done!

More Specifications

Specifications can be changed without notice. Images are for illustrative purposes only.

Dobrý den, bude fungovat injektor o zariadeniami Ubiquiti UniFi UAP-AC-LR, Ubiquiti NanoStation M5 Loco, kroré plánujem s ním zakúpiť a anténou ZTE WF830? Dakujem.

KLB, s.r.o.,

16. 06. 2021,

1 answer

Zdravím, potvrzuji že panel funguje s Ubiquitti Unify (napájím panel 24V, což je nativní napětí Unify). Doporučíte splitter pro zařízení, které podporuje 9-22V a zařízení na 12V? (Rád bych to zapojil do stejného panelu.)

Základní škola a gymnázium Ježek bez klece,

15. 12. 2020,

1 answer

Dobrý den, můžete mě prosím nasměrovat na vhodný napájecí adaptér pro tento PoE panel, pokud je ve vaší nabídce? Dále bych potřeboval vědět, zda tento panel "umí" napájet zařízení Cisco Aironet?

Customer,

28. 05. 2019,

1 answer

Dobrý den potřeboval bych poradit s napájecím adaptérem aby měl stejný konektor 12V 8A nebo 12V 6A děkuji pro 6 kamerový sistem

Petr Pánovec,

28. 05. 2019,

1 answer

Dobrý deň, chcem sa opýtať. Zapojil som kameru do POE adaptéru a z POE adaptéru som napojil kábel do switchu. Žiaľ žiadna odpoveď signálu.

Customer,

19. 03. 2018,

1 answer

Dobrý deň, plánujem do neho zapojiť 6 ip kamier HIKVISION DS-2CD2122FWD-I 4mm, chcem sa spýtať či k touto poe môžem pripojiť tento adaptér: https://www.alza.sk/emos-pro-domaci-videotelefon-h1111-d5031938.htm ? Ďakujem

Karina Šprláková,

22. 01. 2018,

1 answer